SPECapc^® for PTC Creo 2.0

Benchmark Run Rules

1. The benchmark must be run using build F000 or F001 of Creo 2.0.
2. The Creo 2.0 benchmark is only supported on systems running Microsoft Windows 7 64-bit operating system.
3. Only submissions run on Microsoft Windows 7 64-bit operating system and with graphics cards supporting a minimum of 8X MSAA will be accepted for review.
4. The display resolution must be at least 1920 pixels by 1080 pixels. If the system has an integrated display which cannot achieve 1920×1080 resolution, e.g., a notebook, the system’s maximum possible resolution must be used.
5. It is recommended that the Creo 2.0 benchmark be run with at least 8GB of RAM installed.
6. The All.txt, config.pro and apc.dat files must be used as-is and may not be modified or overridden.
7. The benchmark may not use any other config.pro, config.sup, config.win, menu_def.pro, or protk.dat files. These files must be removed from the application install location and user folder before running the benchmark.
8. The graphics card used must support a minimum of 8X MSAA for comparable results.
9. The script file utilities\runbench.bat may be modified to accommodate an alternate install location for Creo 2.0. If modified, the modified version of runbench.bat must be included in the benchmark submission.
10. The utilities\config.txt file must be edited to reflect the system configuration before running the benchmark.
11. The submission must contain the result.txt, trail.txt, score-steps.txt, and apc.dat files. These files may be found in the results directory after a successful run of the benchmark.
12. There must be no license-related warnings in the trail.txt file.
13. The directory structure of the submission must be as follows:
    …/company-name/system_1/creo2/result.txt
    …/company-name/system_1/creo2/trail.txt
    ../company-name/system_1/creo2/score-steps.txt
    …/company-name/system_1/creo2/apc.dat
    …/company-name/system_1/creo2/runbench.bat (if modified, as required by rule i above)
    ../company-name/system_2/creo2/result.txt
    …/company-name/system_2/creo2/trail.txt
    ../company-name/system_2/creo2/score-steps.txt
    …/company-name/system_2/creo2/apc.dat
    …/company-name/system_2/creo2/runbench.bat (if modified, as required by rule i above)
    etc…
14. The submission file must be named company-name_apc_creo2_vN.zip where company-name is the member company or organization name in lower case and vN is the file version (e.g. dell_apc_creo2_v0.zip.) The initial submission is v0. Resubmitted files must have the version number incremented.